Toyspeed

they do have there place ive got 2 vents in the bonnet of my trueno club car
not for show but to lower the under bonnet temps after a good thrashing
ive traveled from hamilton to wellington in the rain and had no trouble



cheers laserracer

rev head is right i took mine out and when i raced at taupo it just didnt have the grunt out of the slower corners .but unfortunalely i thought i would be smart and cut the flanges off the ram tubes after i had removed them i am now making new alloy ones i can graft back on the flanges
i think i ...

im a car valet and i agree with vvega i wouldnt use it on painted mags
works great on chrome and aluminium . if ya just want to clean them
just polish them. if the clear coat is dull or streaky you could trya fine
cutting compound just keep the cloth you apply it with really wet so you
dont ...

you would probably get a better response if you posted these in the tech part of the forum

the day before our track day at taupo the capri car club had a race day
i went along for a look and there in the pits is a bright yellow dx wagon
race car running turbo 4age he had chucked the old rear leaves
and fabricated what looked like strut towers in the rear that were incorperated into ...

hell yea what a difference with mintex 1166 pads new rotors and change
to race fluid what a dumb arse i am i should have done it ages ago

hey guys check out this site it gives a run down on all the performance and race pads that have been used on the track

www.MRTrally.com.au
go to MRTrally all forums forum id 63
dba brake forum.
brake pads



it lists all the pads including mintex and rates them

have fun

im running db308 ferrodo gt11 pads in ma 20v they cost $44 at repco
they maybe ok as a road pad i was told they were a track pad
but have since found out it is what they sell the boy racers because
they are supposed to work well for short distance braking
(between traffic lights) im now waiting ...

being front wheel drive its probably not such a safety issue as the mags i have will fit the front its the rear ones that without spacers the tyres will touch the struts i dont mind putting longer studs on the rear but i dont think i would like to put them on the front .

boosted_gtz
crimson tears
rx toy
atmosports
hey thanks guys just scored some toms race mags for ma race car but off set is slightly out

toyoda if they dont want them i got the cash if you got the spacers
what size are the spacers 10mm?

i really want some before track day

i need 4 4x100 wheel spacers anyone know where to get them

well done ken i was going to reply but i couldnt think of how to explain those little camoflaged suckers if ya dont look closely ya cant see them

use a v8 cat off a holden or falcon

it might pay to stick it up on a hoist to check its not the rubber hose off the back of the water pump leaking
i just replaced my pump on my 20v which was leaking and i was going to replace that rubber hose i bloody well should have because 2 weeks after
replacing the pump you guessed it the ...

who cares what they look like on the outside its whats inside that counts

i love all woman i think they are all (SPECIAL)

i was on a mr2 site in the states and a guy is doing a aw rota conversion
i think he had the engine mounted with an adapter to a ae101 box
he was also selling adapters for a 13b to aw

laserracer dave

ps i dont think it was turboed as he didnt think the box
would handle it