Toyspeed.org.nz Message Board

by **event2** » Mon Sep 06, 2004 10:38 pm

jst wanting to no if standard 4agze ecu will handle me putting in blue top cams?

wat sorta power increase ya get with blue top cams in anyway? i jst gonne get them out of my old ae82 2 motor thats sitting in the shed.

but yea main point: how will they affect my agze rnning with blue top cams in? will it run at all?

ps: any one want any cheep cheep cheep bluetop 4age parts i got a motor full of emmm.

by **matt dunn** » Mon Sep 06, 2004 11:27 pm

With a AFM is shouldn't make that much difference and so the ECU should be fine.

You realise that when you put in the cams you'll have to have all the tappet shims redone to get the correct valve clearance?

by **event2** » Mon Sep 06, 2004 11:47 pm

nope didnt realize
i herd that its jst a straight swap with blue top cams.

its map sensor no afm.

its in a ae101 tureno

by **gdsup** » Tue Sep 07, 2004 12:01 am

bluetop cams in my ze ran sweet, good for 200 hp at with standard pulley, u may have to do shims, but i didnt

by **EVLGTZ** » Tue Sep 07, 2004 8:49 am

gdsup wrote:bluetop cams in my ze ran sweet, good for 200 hp at with standard pulley, u may have to do shims, but i didnt

I didnt either, just changed em straight over and no issues whatsoever

by **IH8TEC** » Tue Sep 07, 2004 12:35 pm

hey evlgtz, has it made much difference? and where.

by **EVLGTZ** » Tue Sep 07, 2004 1:04 pm

IH8TEC wrote:hey evlgtz, has it made much difference? and where.

yeah think so eh, hard to compare power outputs as i've used 2 different dynos of late.

Seems to rev out a bit nicer now.

by **Bazda** » Tue Sep 07, 2004 5:33 pm

i also put blue top cams in mine, straight swap all clearances were within the correct tolerences.
made my car rev out better and reduced some of my lag.
Should run fine with yoru standard ecu. runs fine with my standard ecu but mines afm.

by **event2** » Wed Sep 08, 2004 10:34 pm

cheer s all

by **Pelo** » Thu Sep 09, 2004 8:17 pm

What are the differences between GZE/blue/red top cams?

by **Bazda** » Thu Sep 09, 2004 8:46 pm

mainly the duration.

by **Drifter4ag** » Thu Sep 09, 2004 9:19 pm

uhhh ..
bluetop cames have .5mm more lift than ze/redtop cams

by **Bazda** » Thu Sep 09, 2004 9:25 pm

yea and that to

by **4AGTE** » Fri Sep 10, 2004 8:52 am

SO when you put bluetop cams in do you use the 4agze pully's?

by **EVLGTZ** » Fri Sep 10, 2004 8:55 am

4AGTE wrote:SO when you put bluetop cams in do you use the 4agze pully's?

yep, nothing else is changed

by **wanado13's** » Fri Sep 10, 2004 4:32 pm

is the changeover from gze cams to bluetop ones hard, seeings as i know bugger all, do the gains warrant paying someone to put them in? cos i've got some in my shed and if it's worth it i might as well get them put in!

by **Bazda** » Fri Sep 10, 2004 4:54 pm

prob not worth the hastle if u gotta pay someone to do it, it's basically like doing a cam belt but a bit more work needed.

by **FLAWLES** » Fri Sep 10, 2004 6:38 pm

so there is only .5 of a mm or is this .5 of a tho

ha this has basicly answered my post i done at the start of the week

any1 selling blue top cams????

oh and bazda im still trying to get that price for you.... dont worry man i havent forgotin :wink:

by **Bazda** » Fri Sep 10, 2004 8:25 pm

FLAWLES wrote:so there is only .5 of a mm or is this .5 of a tho

ha this has basicly answered my post i done at the start of the week

any1 selling blue top cams????

oh and bazda im still trying to get that price for you.... dont worry man i havent forgotin

sweet as

Toyspeed.org.nz Message Board

wil my stock 4agze computer fun engin fine if i.....

wil my stock 4agze computer fun engin fine if i.....

Who is online