i got this loom and computer with my 4age. the loom fits the engine all sweet, except for the 3 plugs which go into the computer. the two lefthand plugs go in fine, but the 3rd one in the box doesn't fit - its bigger than the others.
ive been told everything from
"you've been given the wrong ecu/loom" to "get a link computer" to "the 3rd one goes to a circuit board, get another plug that fits the ecu and put that on the loom"
i have been told the engine has been running with that computer and loom.
i had a look at an ae92 loom and the 3 ecu plugs from that fit into mine perfect. only difference is the two lefthand plugs are on an engine loom, and the 3rd (righthand) plug is on a separate loom which goes to the dash.
the engine has gone into a ke35. am i supposed to cut the righthand plug off my loom and replace it with the one off the ae92 so it will fit? or do i need to cut the plug off the ae92 and put it onto my dash loom somewhere then into my computer? and the righthand plug which is currently on my loom goes to a fuse box or something?
confused?? so am i!!
and don't bother telling me if im asking this sort of stuff i should take it to an electrician - because ive been and asked electricians and they all know jacksh*t and everyone tells me different stories. any help would be appreciated.
