Mark 2 Turbo without enough boost.

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Postby AJz » Thu Jun 16, 2005 11:19 pm

dotdog wrote:Id like to see you flick a switch 6000 times a minute cosmo!


i would pay money to see that, lol
I had vtax :(
User avatar
AJz
Toyspeed Member
 
Posts: 3097
Joined: Sun Nov 14, 2004 2:11 am
Location: Dunners

Re: Mark 2 Turbo without enough boost.

Postby pervert » Fri Jun 17, 2005 9:06 am

Santas> :lol: Good shit man, good to see it is catching on, did it go pretty hard until it cut?

Cozmo> ...
pervert wrote:
provided they don't come from Cozmo (no offence)...


Anyone apart from Cozmo got any tricks?
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby RedMist » Fri Jun 17, 2005 9:32 am

Thats 12,000 times per minute. Once on, once off for every RPM.

However a cheap additional injector controller from JCar would work. And for the tuning by ... smell?? that they are going to do, you wouldnt even need an RPM reference.
The answer is Helmholtz!

Toyota ST185 Celica Rally.
Toyota ST205 Celica Rally.
Jimco/ Cosworth 350z Offroader - 609whp at 16psi
User avatar
RedMist
Old Skool User!
 
Posts: 3078
Joined: Tue May 21, 2002 12:39 pm
Location: Christchurch

Postby pervert » Fri Jun 17, 2005 9:45 am

CozmoNz wrote:shes not worth much pervert... things that cant get warrents, cant get warrents... and yes, thats my wet blanket because you got it from me for dirt cheap :).


Last I checked, rust was repairable? :?

No more thanks, on topic only.
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby dohca » Fri Jun 17, 2005 10:00 am

sounds like a boost cut

does it have one of those stupid solinoid controlled enrichment ecus?

if so there should be a seperate solinoid for the boost cut

unplug it and there will be no boost cut

be careful not to unplug the obvious one, aka enrichment solinoid

or else things can get butchered rather easy
User avatar
dohca
Toyspeed Member
 
Posts: 459
Joined: Wed Mar 03, 2004 7:54 pm
Location: New Plymouth

Postby Mr Revhead » Fri Jun 17, 2005 10:49 am

that "7th" injector is the cold start injector.
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby EVL GSXR » Fri Jun 17, 2005 12:14 pm

dotdog wrote:Id like to see you flick a switch 6000 times a minute cosmo!


Bahahahahah that's some serious switch flicking.. If you could pull that off you'd be the ticket for the ladies ha ha ha..
www.lowndvs.co.nz

1997 GSXR750 - 11.23 @ 128mph to date - Round 280kph Top Speed to date
http://toyspeed.blakjak.net/profiles/profile.php?id=793
User avatar
EVL GSXR
Toyspeed Member
 
Posts: 1764
Joined: Tue Aug 17, 2004 3:00 pm
Location: Ice Land

Postby 1598cc » Fri Jun 17, 2005 2:23 pm

cold start injector wont dispurse evenly. extra injectors are a the way to go.
1598cc
Toyspeed Member
 
Posts: 480
Joined: Tue Apr 06, 2004 2:55 pm
Location: aucklNad

Postby spencer » Fri Jun 17, 2005 3:10 pm

Muzz (EVL GT) wrote:
dotdog wrote:Id like to see you flick a switch 6000 times a minute cosmo!


Bahahahahah that's some serious switch flicking.. If you could pull that off you'd be the ticket for the ladies ha ha ha..


or maybe for himself?
ms63 crown
spencer
Toyspeed Member
 
Posts: 1328
Joined: Wed Oct 22, 2003 1:33 pm
Location: hamilton

Postby Dell'Orto » Fri Jun 17, 2005 5:00 pm

How good is the exhaust on it? Wont be the cause of it cutting out, but wont help that freeboosting spool either. Cut all the mufflers out :D
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby pervert » Fri Jun 17, 2005 5:01 pm

Mmm, Boost wrote:How good is the exhaust on it? Wont be the cause of it cutting out, but wont help that freeboosting spool either. Cut all the mufflers out :D


Its a decent size, then gets choked in the rear, might just cut the rear one off... :twisted:
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby flygt4 » Fri Jun 17, 2005 5:26 pm

hahaha rangimods...gotta love em
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby CozmoNz » Fri Jun 17, 2005 7:25 pm

pervert wrote:
Mmm, Boost wrote:How good is the exhaust on it? Wont be the cause of it cutting out, but wont help that freeboosting spool either. Cut all the mufflers out :D


Its a decent size, then gets choked in the rear, might just cut the rear one off... :twisted:


quit repeating what i say to you!

but ANYWAY, the cold start injector, who cares... its not designed to run on 15+psi anyway, so using a rungi injector wont make much difference...

and i told you, unplug that damn solinoid...
Outta here on Dec 5th, 1630, WHOO HOO
Image
Rayne For President!
User avatar
CozmoNz
Toyspeed Member
 
Posts: 5490
Joined: Wed Aug 18, 2004 7:48 pm
Location: Brisbane, Australia

Postby pervert » Fri Jun 17, 2005 7:33 pm

CozmoNz wrote:quit repeating what i say to you!


Do my eyes not see that for themselves?

CozmoNz wrote:and i told you, unplug that damn solinoid...


Doesn't work... :D
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby matt dunn » Sat Jun 18, 2005 12:30 am

Does it have an AFM?

If so then the AFM will reach the end of it's calibration range and the ECU will say stop.

There is no way around it, normally.

BUT.... since you seem intent on destroying it anyway,

pull the top black plastic cover off the AFM, and somehow with something NOT MADE OF METAL limit the travel of the AFM so it will stop a bit short of the end of it's travel.

This will mean two things.

it will stop the boost cut.

it will lean it out at full boost and destroy the engine rather quickly.

My guess as this is not normal practise is it will last about 1 or 2 minutes on full boost with this mod before it will never run again.

To get around this connect a a wire to the earth sid eon the injectors and when it climbs off the boost gauge swith the injectors on and they will full flow the fuel into the engine. this may make it last longer, or it may flood it and foul the plugs.

NOTE: These mods are only if you wish to destroy your engine.

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby pervert » Sat Jun 18, 2005 12:49 am

matt dunn wrote:BUT.... since you seem intent on destroying it anyway,


This is the best thing I have ever heard...it suits me so well... :lol:

Thank you so much, your post is just what I needed to know... :D
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby Santa'sBoostinSleigh » Mon Jun 20, 2005 9:56 am

so the question on all of our minds:
did it last the weekend??!!?!?
Santa's Mega Sale
Santa's TardMe Listings
GTFX: viewtopic.php?t=67655
Discussion: viewtopic.php?t=67658

Some cocksmack stole one of my 5ANTA plates, if you see it please let me/the police know, ta
User avatar
Santa'sBoostinSleigh
** Moderator **
 
Posts: 4154
Joined: Wed Jan 12, 2005 5:54 pm
Location: 'Naki Massif

Postby pervert » Mon Jun 20, 2005 10:03 am

:lol: :lol: :lol: :lol:

No, it's dead, but not through over-boost, I blew up the AFM with some 'testing' and a soldering iron...

It will live another day...
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

Postby Santa'sBoostinSleigh » Mon Jun 20, 2005 10:05 am

you gotta love the testing that involves soldering irons, hammers and side cutters :twisted:
Santa's Mega Sale
Santa's TardMe Listings
GTFX: viewtopic.php?t=67655
Discussion: viewtopic.php?t=67658

Some cocksmack stole one of my 5ANTA plates, if you see it please let me/the police know, ta
User avatar
Santa'sBoostinSleigh
** Moderator **
 
Posts: 4154
Joined: Wed Jan 12, 2005 5:54 pm
Location: 'Naki Massif

Postby pervert » Mon Jun 20, 2005 10:16 am

Sometimes axes get thrown into the mix too, then things get really broken... :lol:
User avatar
pervert
Toyspeed Member
 
Posts: 4365
Joined: Wed Dec 08, 2004 8:03 am

PreviousNext

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 18 guests