Camber plates: Where can I get them made?

[no_8wire]

As above, I am after some camber plates for my AW11, but dont want to pay $600+ US for the only ones I can find on the net. ( after front and rear)

Anyone know who I could contact to get some made?(Auckland based)

[Bazda]

Precesion Engineering in Albany, Jeffrey Bruce.

[evil_si]

have you tried stocks, they are off carbine road, cant remember the street name,

they have allsorts on the shelf and have a machine shop were they can modify or make to suit you application.

[JRS]

tien adjustable mount from autoline. no idea what they're worth.

[Cahuna]

Stocks do everything - the plates (which you drill to the pattern at the top of your strut tower) and the slider plates/roller bearing top mount. The plates from memory were approx $120 each, couldn't tell you the slider plates price.

However, if it is just the plates themselves (ie: you already have slider plates/roller bearing) then go to Precision Engineering FTW. Took my old weak-as 6mm alloy ones in as a pattern and for $60 each they made me some beautiful, much stronger 10mm alloy ones

[86 Power]

Or you could talk to Eugine from 86 Factory. He imports T3 camber plates. Real nice! You could get some with out any holes, and drill them to suit your car. Or just redrill the AE86 T3 one.

[no_8wire]

I need the complete unit, eg the plates and slider plate/bearing

[MrDori]

Bset bet would be find some that fit and either drill the plate to suit or drill the strut tower to suit

[TOYROTA]

as evil_si said try stocks 8 te apunga pl off carbine road in mount wellington.
or ring 09 2707222 and ask to speak to edgar in the service department

[THA SHZ]

as evil_si said try stocks 8 te apunga pl off carbine road in mount wellington.
or ring 09 2707222 and ask to speak to edgar in the service department

speak to edgar ? good luck he hasnt been there for a while and i doubt they will put u through to him in aussie
No 8 wire , let me know if u wana get them from stocks and il will put u on to the rite guys .