Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

Beams 3sge vs Sr20det vs 3tgte

General discussions on all non technical car related topics

Moderator: The Mod Squad

Post a reply

Beams 3sge vs Sr20det vs 3tgte

Postby Babz » Mon Nov 15, 2010 5:40 pm

Hey guys. Just wanted to know what your thoughts are on which engine i should implant into my 1982 Carina TA63. It will be used as a daily driver with trips to the tracks every now and then. I have trying to decide but just can not make up my mind. They all seem to have plus and minus.
User avatar
Babz
Toyspeed Member
 
Posts: 124
Joined: Sun May 08, 2005 1:28 am
Location: East
Top

Postby shihad » Mon Nov 15, 2010 5:42 pm

well if its daily driven keep it reliable so go 3tgte keep it simple.
getting bottled by the friendly Oamaru locals for not doing skids - Coupe Life
User avatar
shihad
Toyspeed Member
 
Posts: 769
Joined: Mon Apr 25, 2005 12:02 am
Location: dunedin in the winter gizzy in the summer
Top

Postby Babz » Mon Nov 15, 2010 5:45 pm

But for the money involved in sourcing a 3tgte and getting it up to spec wouldnt i be better of transplanting a newer motor? I am wanting around the 250 wheel hp mark and all three can achieve this easily with a couple of upgrades.
User avatar
Babz
Toyspeed Member
 
Posts: 124
Joined: Sun May 08, 2005 1:28 am
Location: East
Top

Postby Babz » Mon Nov 15, 2010 5:47 pm

Is the 3sge beams motor any good? meaning will it perform just as good as a s13 sr20det?
User avatar
Babz
Toyspeed Member
 
Posts: 124
Joined: Sun May 08, 2005 1:28 am
Location: East
Top

Postby wde_bdy » Mon Nov 15, 2010 5:51 pm

Dollar for dollar results, put in the SR.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne
Top

Postby Babz » Mon Nov 15, 2010 5:55 pm

thats what i figured out but damn i love toyotas. Does anyone have experience with altezza beams 3sge being transplanted into old rwd toyotas? does it go good? appreciated any info that is given to make my decision.
User avatar
Babz
Toyspeed Member
 
Posts: 124
Joined: Sun May 08, 2005 1:28 am
Location: East
Top

Postby Quirky » Mon Nov 15, 2010 6:01 pm

Theres an AE86 with a 3sge Beams.
Its a track only car running 150kw atw.
Sounds pretty sweet.

Although an SR20det would be quicker, more reliable, and plenty of aftermarket support. Go for the SR.
Hello There
Quirky
Toyspeed Member
 
Posts: 482
Joined: Tue Sep 19, 2006 5:48 pm
Location: Townsville, Australia
Top

Postby wde_bdy » Mon Nov 15, 2010 6:04 pm

If you prefer Toyota power I would actually go with the 3T-GTE, its a much cheaper fitment job as it bolts in and the money saved can be used for a rebuild with forged pistons.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne
Top

Postby shihad » Mon Nov 15, 2010 6:07 pm

depends on your budget i guess. sr better engine in everyway but they did come out with 3t turbos so thats what I would use.i reckon you could buy a 3t and rebuild it for the same price as buying an sr.
getting bottled by the friendly Oamaru locals for not doing skids - Coupe Life
User avatar
shihad
Toyspeed Member
 
Posts: 769
Joined: Mon Apr 25, 2005 12:02 am
Location: dunedin in the winter gizzy in the summer
Top

Postby YeMs » Mon Nov 15, 2010 6:10 pm

wde_bdy wrote:If you prefer Toyota power I would actually go with the 3T-GTE, its a much cheaper fitment job as it bolts in and the money saved can be used for a rebuild with forged pistons.

Callum


yeh but they are a dog - speaking from experience.

sr would be your best option by far. or a 4agze??
Your local Hybrid Elite tech

Project - 93 jzx90 - 3uz ITBs, currently buying lotto tickets to fund manual conversion.
YeMs
Toyspeed Member
 
Posts: 1531
Joined: Tue Apr 29, 2003 4:03 pm
Location: Tauranga
Top

Postby QikStarlie » Mon Nov 15, 2010 6:15 pm

4agte
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..
Top

Postby strx7 » Mon Nov 15, 2010 6:36 pm

altezza motor and 6 speed + turbo and aftermarket ecu
Online Car Forums - Where Hui seems to take preference over Do-ey

HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.

Motorsport Bay of Plenty - http://www.mbop.org.nz
strx7
Toyspeed Member
 
Posts: 3707
Joined: Mon May 24, 2004 12:06 am
Location: Tauranga
Top

Postby shihad » Mon Nov 15, 2010 7:02 pm

strx7 wrote:altezza motor and 6 speed + turbo and aftermarket ecu

defiantly the coolest but if the goal is 250hp at the wheels bit of an overkill and $$$
getting bottled by the friendly Oamaru locals for not doing skids - Coupe Life
User avatar
shihad
Toyspeed Member
 
Posts: 769
Joined: Mon Apr 25, 2005 12:02 am
Location: dunedin in the winter gizzy in the summer
Top

Postby Soiled » Mon Nov 15, 2010 7:21 pm

http://z4.invisionfree.com/lexusaltezza ... opic=10816

Will probably struggle to get the 250hp at the wheels you'd be aiming at, but they do sound pretty sweet at 8k in old cars.

Most are around 118-130rwkws in standard trim, but very reliable.
Last edited by Soiled on Mon Nov 15, 2010 7:24 pm, edited 1 time in total.
Soiled
Toyspeed Member
 
Posts: 93
Joined: Sat Sep 04, 2010 4:05 pm
Top

Postby fuel » Mon Nov 15, 2010 7:23 pm

you wont get 250hp at the wheels with a Beams 3S-GE cheaply. After a set of quads and outboard injectors maybe, it'll probably be 180hp at best at the wheels with a decent intake and headers/exhaust.
LOUD NOISES!!!
User avatar
fuel
Toyspeed Member
 
Posts: 1532
Joined: Sun Jan 25, 2004 1:59 pm
Location: Brisbane Australia
Top

Postby Dell'Orto » Mon Nov 15, 2010 7:37 pm

13B bridgey ;)
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt
Top

Postby Truenotch » Mon Nov 15, 2010 8:08 pm

Phil - there are a few standard Beams with G4's and quads that have pulled over 200HP in NZ... But 250 would take quite a bit more development.
User avatar
Truenotch
Toyspeed Member
 
Posts: 1960
Joined: Sun Jan 09, 2005 3:41 pm
Location: Hamilton
Top

Postby d1 mule » Mon Nov 15, 2010 8:23 pm

3ts are a step in the wrong direction.

and i dont like cross breeding

so beams and 6 speed

i have a mate with one in a ae85 with quads and a link G4 its 200 HP at the wheels and more than fast enough as a rack car let alone a street car.

or 4agte, cheap easy been done a million times before so there is heaps on info, mine makes 230whp and its pretty standard just ht18/t3 450cc injectors and a link. more than fast enough
d1 mule
Toyspeed Member
 
Posts: 1790
Joined: Sun Dec 18, 2005 9:32 pm
Location: perth, WA
Top

Postby tsoob » Mon Nov 15, 2010 8:55 pm

1UZ and be done with it
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi
Top

Postby Bling » Mon Nov 15, 2010 9:01 pm

No room for a....?
Image
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City
Top
Next
Post a reply

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 18 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.225s | 12 Queries | GZIP : On