Tuners in the waikato

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Tuners in the waikato

Postby bbq1988 » Sun Feb 21, 2010 5:50 pm

Hey guys, I am looking at finding a tuner to do my base tune to run my car in, i would like to keep it in the waikato (Hamilton Rotorua or Tauranga)

Has anyone had any experience with any tuners around these ways?


Cheers, Harley
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby Heylin » Sun Feb 21, 2010 7:19 pm

cartune company in frankton is good and they have their own dyno, they specialise in Link EMS tuning.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Postby atmosports » Sun Feb 21, 2010 8:15 pm

Give Dave at DTech in Tauranga a call, he used to work for Link & still does bits & pieces for them. can be hard to get hold of as he's overseas a bit. Haven't got his number handy but can probably get it if needed.

Else do what alot of other guys from down there do & just bring the thing to Auckland.
atmosports
Toyspeed Member
 
Posts: 569
Joined: Fri Jul 04, 2003 7:52 pm
Location: Auckland,New Zealand

Postby bbq1988 » Sun Feb 21, 2010 8:18 pm

Yeah ill give him a call, cheers mate. I may take the car to R.I.P.S, as they know the RB'S inside and out
Baked, Not Fried.
bbq1988
Toyspeed Member
 
Posts: 1379
Joined: Tue Jun 06, 2006 10:06 am
Location: Te Kuiti, Land of the wrong white crowd

Postby evil_si » Sun Feb 21, 2010 9:49 pm

have heard lots of good things about dave at DTech
from what i understand infomotive in rotorua do rips tuning

not a fan of car tune after they did the altezza
User avatar
evil_si
Toyspeed Member
 
Posts: 2353
Joined: Sat Nov 01, 2003 6:19 pm
Location: TAURANGA, Pyes Pa

Postby Emperor » Mon Feb 22, 2010 12:24 am

Yeh i'd go to Dtech.

Also heard horror stories about CarTune, but only stories so could be b.s for all I know
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby Heylin » Mon Feb 22, 2010 11:17 am

Also heard horror stories about CarTune, but only stories so could be b.s for all I know


Do tell, they are doing my car soon.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Postby FANGIN » Mon Feb 22, 2010 11:44 am

Have also HEARD horror stories..
$4800 to supply, wire & tune a microtech & never got the tune right etc..

Dynopower did a base tune on a mates extended port RX7 (also wired TPS & found a faulty injector wire) for $330 + GST 14months ago
(LINK G3) Tune was good & car is still going strong, which is amazing considering its a rowtree
1998 AE111 Carib - For Sale!
1999 JZS161 GS300 - Tow Wagon
1986 FC3S - 410wkw Drag / Track Toy
FANGIN
Toyspeed Member
 
Posts: 618
Joined: Wed Oct 15, 2008 4:52 pm
Location: Hamilton / Tauranga

Postby 0EBUNY » Tue Feb 23, 2010 9:57 am

Emperor wrote:Yeh i'd go to Dtech.

Also heard horror stories about CarTune, but only stories so could be b.s for all I know


yea ive herd some not so great stories too.
new project
1998 toyota altezza :D where do i start plans go for miles
0EBUNY
Toyspeed Member
 
Posts: 74
Joined: Sun Sep 22, 2002 11:06 pm
Location: Hamilton

Postby FANGIN » Tue Feb 23, 2010 9:59 am

Think Vvega works at Cartune now??
1998 AE111 Carib - For Sale!
1999 JZS161 GS300 - Tow Wagon
1986 FC3S - 410wkw Drag / Track Toy
FANGIN
Toyspeed Member
 
Posts: 618
Joined: Wed Oct 15, 2008 4:52 pm
Location: Hamilton / Tauranga

Postby levinguy » Tue Feb 23, 2010 12:11 pm

FANGIN wrote:Think Vvega works at Cartune now??


he's the workshop manager from what i've heard
levinguy
Toyspeed Member
 
Posts: 984
Joined: Mon Jan 02, 2006 4:14 pm
Location: Pukekohe/ Central Auckland

Postby Heylin » Tue Feb 23, 2010 12:28 pm

Think Vvega works at Cartune now??


He did my custom exhaust, excellent quality work.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Postby AceSniper » Tue Feb 23, 2010 2:17 pm

:arrow: Car tune have lease of total performance's dyno its only been relocated for about a month or less......
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby evil_si » Tue Feb 23, 2010 6:35 pm

had a good chat to wayne / vvega from car tune today,
definatly sounds like things are changing for the better, have even offered to sort the tune on the altezza
User avatar
evil_si
Toyspeed Member
 
Posts: 2353
Joined: Sat Nov 01, 2003 6:19 pm
Location: TAURANGA, Pyes Pa

Postby Dell'Orto » Tue Feb 23, 2010 7:56 pm

Tuner info only please, no gossip kthnxbi
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Heylin » Tue Feb 23, 2010 8:22 pm

Yeah Cartune is great I can vouch for that, they have done thousands of $$$ worth of work on the MR2, they really know their stuff when it comes to performance cars.

Wayne is really on to it.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Postby YeMs » Thu Feb 25, 2010 12:59 pm

FANGIN wrote:Have also HEARD horror stories..
$4800 to supply, wire & tune a microtech & never got the tune right etc..

Dynopower did a base tune on a mates extended port RX7 (also wired TPS & found a faulty injector wire) for $330 + GST 14months ago
(LINK G3) Tune was good & car is still going strong, which is amazing considering its a rowtree


Brent from Dynopower has worked with dyno's for years. his knowledge, combined with Geoffrey Nicholson's wealth of knowledge make for a great team. they have tuned all my cars. tuned my 2jzgte cressida to over 400kw on a standard long block which was safe as houses and took an absolute beating and still came back for more. tuned my s13 silvia with a standard blacktop sr20, Gt28 and fuel pressure reg to 220kw, my 1jzgte hilux. My cousin has a 89 lancer with a 4g63T, speedfactor installed a V5 link on it and 'road tuned' it. when we first ran it up, it made 156 4wkw. by the time brent had finished, it made close to 260 4wkw.

They also have the advantage of having an in house rolling road 4WD dyno... which dave from DTECH doesnt.
Your local Hybrid Elite tech

Project - 93 jzx90 - 3uz ITBs, currently buying lotto tickets to fund manual conversion.
YeMs
Toyspeed Member
 
Posts: 1531
Joined: Tue Apr 29, 2003 4:03 pm
Location: Tauranga

Postby cata » Thu Feb 25, 2010 6:36 pm

YeMs wrote:
Brent from Dynopower has worked with dyno's for years. his knowledge, combined with Geoffrey Nicholson's wealth of knowledge make for a great team. they have tuned all my cars. tuned my 2jzgte cressida to over 400kw on a standard long block which was safe as houses and took an absolute beating and still came back for more. tuned my s13 silvia with a standard blacktop sr20, Gt28 and fuel pressure reg to 220kw, my 1jzgte hilux. My cousin has a 89 lancer with a 4g63T, speedfactor installed a V5 link on it and 'road tuned' it. when we first ran it up, it made 156 4wkw. by the time brent had finished, it made close to 260 4wkw.

They also have the advantage of having an in house rolling road 4WD dyno... which dave from DTECH doesnt.


Definately agree with you there Yems, I wouldn't consider going anywhere else except Dynopower for tuning. The combination of Brent and Geoff for knowledge, diagnosis and ability is second to none in my opinion.

-Mike
cata
Toyspeed Member
 
Posts: 23
Joined: Sat Mar 05, 2005 11:02 am
Location: Tauranga


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 8 guests